AC-SVX001A-EN
61
Table 24. Settings screen items (continued)
Description
Resolution Units
Capacity Control Softload
Time XXXX Sec
Local Atmospheric
Pressure XXX.X
psi/kPa
Power Up Start Delay
XXX Min
Feature Settings
External Chilled/Hot
Water Setpoint (Enable/
Disable)
Text
External Current Limit
Setpoint (Enable/Disable)
Text
LCI-C Diagnostic
Encoding (Enable/
Disable)
Text
Chilled Water Reset
(Constant, Outdoor,
Return, Disable)
Disable Text
Return Reset Ratio XXX %
Return Start Reset XXX.X
°F / °C
Return Maximum Reset XXX.X
°F / °C
Outdoor Reset Ratio XXX %
Outdoor Start Reset XXX.X
°F / °C
Outdoor Maximum Reset XXX.X
°F / °C
Mode Overrides
Evap Water Pump (Auto,
On)
Auto Text
Cond Water Pump (Auto,
On)
Auto Text
Display Settings
Display settings can be customized. The display also
includes a function to clean the touch screen.
Viewing the Settings Screen
Display Settings are found on the right column of the
Settings screen as shown in [Missing cross reference
text]. Included are the following:
• Display Preferences
• Language
• Date and Time
• Clean Display
Viewing and Changing Display Preferences
On the Settings screen, click DDiissppllaayy PPrreeffeerreenncceess
which includes the following:
• Date Format
• Date Separator
• Time Format
• Unit System
• Pressure Units
• Number Format
Figure 41. Display preference screen
Each of the buttons shows the current value for each
selection. Click any of these buttons to change. Select
the option to be changed, which will be shaded..
Example in figure below shows a selection of
MMDDYYY for the date format.
Figure 42. Date format preference selection
Click SSaavvee to confirm your selection and return to
Display Preferences screen.
Following are the preference options available:
• DDaattee FFoorrmmaatt
– MMDDYYYY (default)
– YYYYMMDD
– DDMMYYYY
• DDaattee SSeeppaarraattoorr
– None
– Slash (default)
– Hyphen
• TTiimmee FFoorrmmaatt
– 12 hour (default)
– 24 hour
• UUnniittss SSyysstteemm
– SI
CCoonnttrroollss
To Next Page
Loading...
Need help?
General