Trane CVHE Installation

AFDH-SVN01A-EN 9
Unit Model
Number
For service purposes, Trane Model
AFDH Air-Cooled drive upgrade
packages are assigned a multiple
character alphanumeric model
number that precisely identifies each
unit.
An explanation of the identification
code that appears on the unit
nameplate is shown below. Use of the
service model number will enable the
owner/operator, installing
contractors, and service technicians
to define the operation, components,
and options for any specific unit.
Refer to the model number printed on
the nameplate when ordering
replacement parts or requesting
service.
Example model number:
AFDH0312FA0C10D1010
Digit 1, 2, 3, 4— Unit Model
A = Adaptive
F = Frequency
D = Drive
H = Design Sequence H
Digit 5, 6, 7, 8— Nameplate RLA
0312 = 312 Rated Load Amps
Digit 9— Voltage
F = 460 Volts/60 Hz/3 Phase
G = 480 Volts/60 Hz/3 Phase
Digit 10, 11— Design Sequence
A0) = Initial Design
Digit 12— Enclosure Type
C = Retrofit Standard Enclosure
Digit 13— Agency Listing
1 = UL (Underwriters Laboratory) & CSA
(Canadian Standards Association)
Digit 14— Harmonic Attenuation
0 = Standard Attenuation
1 = 414 Max RLA Line Reactor
2 = 643 Max RLA Line Reactor
3 = 500 Max RLA Line Reactor
4 = 1200 Max RLA Line Reactor
5 = 12 Pulse Autotransformer
Digit 15— VFD Frame Size
C = 302 Maximum RLA
D = 361 Maximum RLA
E = 443 Maximum RLA
G = 540 Maximum RLA
H = 590 Maximum RLA
J = 678 Maximum RLA
K = 730 Maximum RLA
Digit 16— Control Type
1 = UCP2
2 = CH531 / AdaptiView
Digit 17— Motor/Panel Transition
0 = None
A = 6-inch Transition
B = 18.5-inch Transition
C = 12-inch Transition
Digit 18— Mounting Type
1 = Unit Mount
2 = Floor Mount
3 = Remote Mount
Digit 19— Floor Mount Options
0 = None
A = Floor Mount Corner Brackets
B = Floor Mount Corner Brackets & Legs
Model Number Descriptions

Trane CVHE Specifications

General

Brand	Trane
Model	CVHE
Category	Chiller
Language	English