How to Ride the Motorcycle
108
Deactivation
The hill hold control system will
automatically deactivate when it detects
that the rider is attempting to move off.
The system will progressively release
the rear brake to assist the rider in
moving off.
The hill hold control system can also
be manually deactivated by a second
firm squeeze of the front brake lever. A
message is shown briefly in the display
and the hill hold warning light is then
shown in amber.
Hill Hold Unavailable
If when attempting to activate the hill
hold control system, the amber hill hold
unavailable warning light is shown, this
indicates one or more of the following:
•
The activation conditions have not
been met, see page 107.
•
There is a fault with the ABS or
engine management systems
and the ABS and/or MIL warning
lights are illuminated. For more
information, see the Warning Lights
section on page 25.
A hill hold unavailable warning message
is also shown in the display.
The hill hold control system can be
enabled or disabled (see
page 47).
Parking
Warning
Gasoline is extremely flammable
and can be explosive under certain
conditions.
If parking inside a garage or other
structure, be sure it is well ventilated
and the motorcycle is not close to
any source of flame or sparks. This
includes any appliance with a pilot
light.
Failure to follow the above advice may
cause a fire resulting in damage to
property or personal injury.
Warning
The engine and exhaust system will be
hot after riding.
DO NOT park where pedestrians
and children are likely to touch the
motorcycle.
Touching any part of the engine or
exhaust system when hot may cause
unprotected skin to become burnt.
To Next Page
Loading...
Need help?
General
