General Information
69
Models without Daytime Running Lights
(DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note
A lighting on/off switch is not installed
on this model. The position light, brake/
tail light and license plate light all
function automatically when the ignition
is turned to the ON position.
The headlight will function when the
ignition is turned on and the engine is
running.
Throttle Control
2
1
3
1. Throttle open position
2. Throttle closed position
3. Cruise control cancel position
This Triumph model has an electronic
throttle twist grip to open and close
the throttle via the engine control unit.
There are no direct-acting cables in the
system.
The throttle grip has a resistive feel to
it as it is rolled rearwards to open the
throttle. When the grip is released it will
return to the throttle closed position
by its internal return spring and the
throttle will close.
From the closed position, the throttle
twist grip can be rolled forward
0.12 - 0.16 in (3 - 4 mm) to deactivate the
cruise control (see page 72).
There are no user adjustments for the
throttle control.
If there is a malfunction with the
throttle control the Malfunction
Indicator Light (MIL) becomes
illuminated and one of the following
engine conditions may occur:
•
MIL illuminated, restricted engine
RPM and throttle movement
To Next Page
Loading...
Need help?
General
