General Information
54
An adjuster is fitted to both the front
brake and clutch levers. The adjusters
allow the distance from the handlebar
to the lever to be changed to one of five
positions for the front brake lever or
four positions for the clutch lever, to
suit the span of the operator's hands.
To adjust the lever, push the lever
forward and turn the adjuster wheel to
align one of the numbered positions
with the arrow mark on the lever holder.
The distance from the handlebar grip to
the released lever is shortest when set
to number five, and longest when set to
number one.
Brake Lever Adjuster -
Thruxton R Only
Warning
Do not attempt to adjust the levers
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic
to gain familiarity with the new lever
setting.
Do not loan your motorcycle to anyone
as they may change the lever setting
from the one you are familiar with
causing loss of motorcycle control and
an accident.
1. Brake lever
2. Adjusting screw
To adjust the brake lever, push the lever
forward and turn the adjusting screw in
to increase the distance or out to
shorten the distance from the
handlebar.
To Next Page
Loading...
Need help?
General
