General Information
63
Seat Removal and Installation
Warning
To prevent detachment of a seat
during riding, after fitting always grasp
the seat and pull firmly upwards.
If the seat is not correctly secured it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Street Twin, Street Cup, Thruxton,
Thruxton R, Bonneville T100 and
Bonneville T120
Seat Removal
To remove the seat:
1. Seat lock
Insert the ignition key into the seat lock
and turn it anticlockwise.
This will release the seat from its lock.
Slide the seat upwards and rearwards
for complete removal from the
motorcycle.
Street Twin, Street Cup, Thruxton,
Thruxton R, Bonneville T100 and
Bonneville T120
Seat Installation
To refit the seat:
Engage the seat's tongue underneath
the bracket near the fuel tank.
Line up the hinges and press down at
the rear to engage the seat lock.
Note:
• An audible click can be heard when
the seat is fully engaged into its
lock.
Street Scrambler Seat Removal
Note:
• If a passenger seat is fitted, it must
be removed before removing the
rider’s seat.
• If a luggage rack is fitted, the
rider’s seat can be removed without
removing the luggage rack.
To Next Page
Loading...
Need help?
General
