General Information
64
Passenger Seat Removal
To remove the passenger seat:
cjyn
2
1
1. Passenger seat
2. Fixing
Remove the fixing securing the
passenger seat to the luggage rack
frame.
Lift the seat up from the back and slide
rearwards to remove it from the
motorcycle.
Rider’s Seat Removal
To remove the rider’s seat:
Remove the passenger seat if fitted.
1. Seat lock
Insert the ignition key into the seat lock
and turn it anticlockwise while pressing
down on the rear of the seat.
This will release the seat from its lock.
Lift the seat up from the back and slide
rearwards to remove it from the
motorcycle.
Street Scrambler Seat Installation
Warning
To prevent detachment of a seat
during riding, after fitting always grasp
the seat and pull firmly upwards. If the
seat is not correctly secured it will
detach from the lock.
If the seat is not correctly secured it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider’s Seat Installation
To install the rider’s seat:
Engage the seat’s tongue under the fuel
tank.
Note:
• An audible click can be heard when
the seat is correctly engaged in the
lock.
Press firmly down in the centre of the
seat to engage the lock.
Grasp the seat and make sure it is
securely retained.
To Next Page
Loading...
Need help?
General
