General Information
62
Seats
Seat Care
Caution
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
to the seat covers.
Thruxton and Thruxton R
Seat Stand
To prevent damage to the seat after
removing:
Release the metal stand from the
underside of the seat.
Place the seat cover facing upwards, on
a clean, flat surface using the metal
stand and two plastic stands at the rear
of the seat to rest on.
See page 140 for seat cleaning
information.
Seat Lock
Warning
To prevent detachment of the seat
during riding, after fitting always grasp
the seat and pull firmly upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
1. Seat lock
The seat can be removed to gain access
to the battery, fuse box (on certain
models) and Owner's Handbook.
The seat lock is located on the left hand
side of the motorcycle, on the frame
below the seat.
To Next Page
Loading...
Need help?
General
