General Information
57
Bike Set Up–Traction Control (TC)
The Traction Control (TC) system
can be temporarily disabled. The
Traction Control (TC) system cannot
be permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.
To disable or enable the TC system:
• From the BIKE SET UP menu, press
the joystick center to select TC.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick center to select
the required option.
• Once selected the display will return
to the BIKE SET UP display.
Bike Set Up–Service
The service interval is set to a distance
and/or time period.
To review the service interval:
• From the BIKE SET UP menu, push
the joystick down to select SERVICE.
• Press the joystick center to display
the SERVICE information.
Trip Set Up
This menu allows the configuration of
the trip meters.
To access the Trip Set Up menu:
• From the MAIN MENU, push the
joystick down and select TRIP SET
U P.
• Press the joystick center to confirm.
Selecting TRIP 1 RESET or TRIP 2 RESET
allows the relevant trip meter to be
configured manually or automatically.
The trip meter set up procedure is the
same for both trip meters.
Manual reset will only reset the selected
trip meter when the rider chooses to do
so. For more information, see page 58.
Automatic reset will reset each trip
meter after the ignition has been
switched off for a set time. For more
information, see page 58.
To Next Page
Loading...
Need help?
General
