TSC MH261T Series User Manual

- 19 -
3 Setup
3.1 Setting up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power
cord into a properly grounded power outlet.
Note: Please switch OFF printer power switch prior to plug in the power cord to printer power jack.

TSC MH261T Series Specifications

General

Brand	TSC
Model	MH261T Series
Category	Barcode Reader
Language	English