EasyManuals Logo
Home>TSC>Barcode Reader>MH261T Series

TSC MH261T Series User Manual

TSC MH261T Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
- 56 -
7 Maintenance
This session presents the clean tools and methods to maintain your printer.
For Cleaning
Depending on the media used, the printer may accumulate residues (media
dust, adhesives, etc.) as a by-
product of normal printing. To maintain the best printing quality, you should remove these residues by cleaning
the printer
periodically. Regularly clean the print head and supply sensors once change a new media to keep
the printer at the optimized performance and extend printer life.
For Disinfecting
Sanitize your printer to protect yourself and others and can help prevent the spread of viruses.
Important
- Set the printer power switch to O (Off) prior to performing any cleaning or disinfecting tasks. Leave the
power cord connected to keep the printer grounded and to reduce the risk of electrostatic damage.
- Do not wear rings or other metallic objects while cleaning any interior area of the printer.
- Use only the cleaning agents recommended in this document. Use of other agents may damage the
printer and void its warranty.
- Do not spray or drip liquid cleaning solutions directly into the printer. Apply the solution on a clean lint-
free cloth and then apply the dampened cloth to the printer.
- Do not use canned air in the interior of the printer as it can blow dust and debris onto sensors and
other critical components.
- Only use a vacuum cleaner with a nozzle and hose that are conductive and grounded to drain off static
build up.
- All reference in these procedures for use of isopropyl alcohol requires that a 99% or greater isopropyl
alcohol content be used to reduce the risk of moisture corrosion to the printhead.
- Do not touch printhead by hand. If you touch it careless, please use 99% Isopropyl alcohol to clean it.
- Always taking personal precaution when using any cleaning agent.
Cleaning Tools
Cotton swab
Lint-free cloth
Brush with soft non-metallic bristles
Vacuum cleaner
75% Ethanol (for disinfecting)
99% Isopropyl alcohol (for printhead and platen roller cleaning)
Genuine printhead cleaning pen
Mild detergent (without chlorine)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC MH261T Series and is the answer not in the manual?

TSC MH261T Series Specifications

General IconGeneral
BrandTSC
ModelMH261T Series
CategoryBarcode Reader
LanguageEnglish

Related product manuals