TSC MH261T Series User Manual

- 48 -
5.8 Diagnostics
Item
Description
Print Config.
This feature is used to print current printer configuration to the label. On
the configuration printout, there is a print head test pattern, which is
useful for checking if there is any dot damage on the print head heater
element.
Note:
Checking dot damage requires 6” wide paper width.
Self-test printout
Model name
F/W version
Firmware checksum
Printer S/N
TSC configuration file
System date
System time
Printed mileage
(meter)
Cutting counter
Print speed (inch/sec)
Print darkness
Label size (inch)
Gap distance (inch)
Gap/black mark sensor
intension
Code page
Country code
Diagnostics
Print Config.
Dump Mode
Print Head
Display
Sensor
Diag Gap
Diag Black Mark
Diag Ribbon End

TSC MH261T Series Specifications

General

Brand	TSC
Model	MH261T Series
Category	Barcode Reader
Language	English