Tyco Electronics Galaxy SC Controller J85501F-1
1 - 2 Introduction Issue 13 February 2001
The Product
Manual
The emphasis throughout this manual is on step-by-step instructions for
day-to-day use.
Section Two, Product Description, describes Galaxy SC, outlining its
technical highlights, features, and applications. In the same section, you
will learn how to navigate through Galaxy SC’s many functions from
the front panel user interface.
Section Three, Installation, covers installation: getting started: tools, test
equipment, and step-by-step instructions for installation. The section
covers both installation in a new plant and replacing a Tyco Electronics
MCS Controller with Galaxy SC. The section also includes information
on various intelligent plant options and a procedure for adding,
removing, or replacing circuit packs.
Section Four, Configuration, shows you how to integrate Galaxy SC
into your plant, monitoring and controlling the equipment and functions
unique to your application. A tutorial section teaches you how to operate
the Galaxy SC Controller from its front panel, from a remote terminal,
or from a personal computer that emulates a terminal.
Section Five, Acceptance Testing, covers acceptance testing: what
equipment you will need, and step-by-step test procedures to insure that
Galaxy SC is up and running properly.
Section Six, Operation, shows you step-by-step how to perform
common accessing and control functions once Galaxy SC has been
initialized. The section includes instructions for both front panel and
remote terminal access.
Section Seven, Feature Descriptions, describes all of the Galaxy SC
features in detail.
Section Eight, Troubleshooting, is a troubleshooting guide. Turn to this
section any time Galaxy SC does not perform as expected.
Section 9, Safety, provides safety statements, warnings, and a
description of the safety symbols.
Section 10 is the Product Warranty.
Appendices A through D provide information on the T1.317
user-interface language used for communication with Galaxy SC and
the TL1 (Transaction Language 1) command interface available for use
with private alarm networks.
Appendix E describes the Terminal Menu Interface feature.
Appendix F lists the Spare Parts available for the Galaxy SC Controller.
Appendix G is a Glossary of terms used throughout this manual.
To Next Page
Loading...
Need help?
General
