EasyManuals Logo
Home>Tyco>Controller>Galaxy SC Controller

Tyco Galaxy SC Controller User Manual

Tyco Galaxy SC Controller
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #283 background imageLoading...
Page #283 background image
Tyco Electronics Galaxy SC Controller J85501F-1
7 - 49 Feature Descriptions Issue 13 February 2001
login state Indicates whether a user is logged in on this port.
The possible states are:
LOGOUT - no one is logged in
USER - T1.317 user security level session in progress
SUPER-USER - T1.317 super-user security level session in
progress
ADMINISTRATOR - T1.317 administrator security level
session in progress
TL1 - TL1 session in progress
baudrate Range of values: 300, 1200, 2400, 4800, 9600, 19200, or
AUTO, default: AUTO
data bits Range of values: 7 or 8, default: 8
parity Range of values: odd, even, or none, default: none
stop bits Range of values: 1 or 2, default: 1
time-out Defines idle time in minutes before T1.317 interface user is
automatically logged off.
range of values: 0 to 45 minutes where 0 disables the time-out,
default: 0
handshakingRange of values: no
software - X-ON and X-OFF flow control
default: no
application Determines whether the port is used as a T1.317 interface or
Tl1 interface.
range of values: TERMINAL - T1.317 interface
TL1 - Tl1 interface
default: TERMINAL
If the baudrate parameter is set to AUTO then the port will autobaud
from 1200 to 9600 baud. Autobaud at 300 and 19200 baudrates is not
available. The port autobauds by looking for the carriage return
character, ASCII 13, before a login session begins. If the application is
set to Tl1 then the baudrate should be set to match the baudrate of the
communication equipment connected to the auxiliary port. If the
auxiliary port configuration is changed, then that change will take affect
immediately.
Modem Port The modem port provides access to terminals using a T1.317 interface
and is also used for alarm call-out and periodic status call-out. The
following defines the parameters that characterize the modem port:
login state Indicates whether a user is logged in on this port.
The possible states are:
LOGOUT - no one is logged in
USER - T1.317 user security level session in progress
SUPER-USER - T1.317 super-user security level session in
progress
ADMINISTRATOR - T1.317 administrator security level
session in progress

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tyco Galaxy SC Controller and is the answer not in the manual?

Tyco Galaxy SC Controller Specifications

General IconGeneral
BrandTyco
ModelGalaxy SC Controller
CategoryController
LanguageEnglish

Related product manuals