Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Appendix D - 8 TL1 (Transaction Language 1) and X.25 Interface Issue 13 February 2001
Table D-4: PAD Messages
PAD Message Description
CMD ACCEPTED
Command was entered and executed without
errors
CMD REJECTED
Command rejected. Probably caused by
incomplete command.
COM Call connected
ERR
Invalid command syntax, or missing or bad
parameter.
ERR 014
Command rejected. Command requires
password.
INV Invalid X.28 PAD parameter.
INV CMD Command entered does not exist.
INV PARAM
VA L UE
Parameter values have incorrect options set,
are incorrect or out-of-range.
RESET DTE 000 PVC operational.
RESET DTE 017
PVC out of order. Check connection and
DCE/DTE status of ALL devices.
RESET DTE 051 PVC out of order (timer expiry).
RESET DTE 073 Call contains invalid DTE address.
RESET DTE 113 SVC Cleared because X.25 connection down.
SERVICE: PAD Service prompt (banner).

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English