Tyco Galaxy SC Controller User Manual

Tyco Electronics Galaxy SC Controller J85501F-1
Issue 13 February 2001 TL1 (Transaction Language 1) and X.25 Interface Appendix D - 25
response header
M^^CTAG^COMPLD cr lf;
Autonomous
Commands From
Galaxy (NE) to OS
Report Alarm
The Galaxy automatically sends the following message to report the
occurrence or retirement of alarms on objects configured as Equipment
for TL1 reporting:
response header
alarm code^atag^REPT^ALM^EQPT cr lf
^^^"AID:alarm level,condtype,service affecting,,,,\" conddesc\"," cr lf
...
^^^"AID:alarm level,condtype,service affecting,,,,\" conddesc\"," cr lf;
Where:
Alarm Codes:
*C critical
** major
*^ minor
A^ automatic (i.e., all alarm levels in report are CL [clear])
ATAG integer value (sequence number of autonomous command
generated by Galaxy)
AID as specified by user via object configuration
Alarm level CR | MJ | MN | CL (Critical [CR], Major [MJ], Minor [MN], or
Clear [CL])
Condtype as specified by user via object configuration
Service affectingSA | NSA (Service Affecting [SA] or Non-Service Affecting
[NSA])
as specified by user via object configuration
Conddesc object description
Report Alarm Environment
The Galaxy automatically sends the following message to report the
occurrence or retirement of alarms on objects configured as
Environment for TL1 reporting:
response header
alarm code^atag^REPT^ALM^ENV cr lf
^^^"AID:alarm level, condtype,,,\"conddesc\"" cr lf
...
^^^"AID:alarm level, condtype,,,\"conddesc\"" cr lf;
Report Removal
The Galaxy automatically sends the following message to report the
removal of equipment on objects configured as Equipment Presence for
TL1 reporting:

Tyco Galaxy SC Controller Specifications

General

Brand	Tyco
Model	Galaxy SC Controller
Category	Controller
Language	English