5 - 2
Work Procedure
(1) When driving the Ride on lawn-
mower to attach or detach an im-
plement, make sure that there is
no one in between or around the
Ride on lawnmower and imple-
ment.
(2) Install and remove the imple-
ment only on safe and level
ground.
(3) When installing a heavy imple-
ment, install weight on the front
to keep balance.
(4) When adjusting an implement,
apply the parking brake, stop the
engine and set the PTO switch
in the OFF position in advance.
(5) To tow anything, use the towing
hitch only.
1. Precautions for handling imPlement
Read instructions on warning de-
cals on each implement thorough-
ly before work.
To avoid an injury due to mishan-
dling of an implement, read the
user's manual of the implement
thoroughly and work safely and
precisely with caution.
Installation of an improper imple-
ment can lead to an injury. Install
only implements specified by the
Manufacturer.
•
•
•
Warning
To Next Page
Loading...
Need help?
General
