It is not recommended to use
a pressure washer to clean the
mower assembly. High pressure
water may cause damage to
spindles, pulleys, belts, or bear-
ings shortening life and reduc-
ing serviceability.
•
CAUTION
TK0303A
TK0304A
Life of the mower depends upon the
maintenance given. Proper lubrica-
tion is very important.
Always lubricate the deck and lift
components before operation.
Always wipe the fittings to be lu-
bricated with a clean cloth before
greasing. Dirt injected into the tting
will cause damage to the machined
parts.
Use SAE Multi-purpose lithium base
grease on all lubrication locations
shown below. Remember to wipe
away excess grease, which has
built up around parts.
Lubricate grease ttings after every
50 hours of operation.
Miscellaneous working parts not
provided with lubrication fittings
should be oiled daily with a good
grade of lubricating oil.
14. LUBRICATION
To Next Page
Loading...
Need help?
General
