15. SETTING MOWERS
TK0305A TK0306A
Hydraulic Control Lever
1. Start the engine and move the
hydraulic lever rearward to raise
the mower rear link to the highest
position.
2. Stop the engine and remove the
key.
3. Push the mower under the Ride
on Mower from right side or ride
on Ride on Mower.
Park the Ride on Mower on a
firm, flat and level surface, set
the parking brake, stop the en-
gine and remove the key.
•
CAUTION
TK0307A
Universal joint
Coupler
Mid-PTO shaft
TK0308A
A
Universal joint
Coupler
UNIVERSAL JOINT
1. Pull back the coupler of the uni-
versal joint.
2. Push the universal joint onto the
mid-PTO shaft, until the coupler
locks.
►
To Next Page
Loading...
Need help?
General
