7. rIde on lawnmower
Manage PTO
- Stop PTO before stopping the engine.
- Do not remove the PTO protective cover or protec
-
tive panel for operating machine.
- Do not use PTO adaptor in order to extend the POT
coupler or universal joint to outside of PTO protec-
tive cover.
To repair, secure the wheel width, or changing the
wheel under either Ride on lawnmower or trailer, with
the Ride on lawnmower or trailer raised, choke the
wheels that are on the ground.
Do not use hydraulic jack for operating machine or
Ride on lawnmower. Instead, use block or stand.
Safety frame
- Do neither weld nor drill a hole on the attached safe-
ty frame. Also do not modify it.
- Replace the damaged safety frame with a new one.
- If the safety frame was removed for specialized
work, restore it immediately.
Be careful to touch dangerous area such as power
transmission gear, rotating unit, etc. Put on a protec-
tive cover.
Do neither modify nor remove the safety device.
To Next Page
Loading...
Need help?
General
