1. ride on lawnmower Storage
daily Storage
(1) Store the Ride on lawnmower af-
ter cleaning it. Especially, clean
it thoroughly after harrowing or
working in a wet eld.
(2) Make sure to lower an imple-
ment.
(3) Store the Ride on lawnmower in-
doors if possible.
(4) If storing the Ride on lawnmower
outside, cover it.
(5) For better startability, it is rec-
ommended to remove the bat-
tery from the Ride on lawnmow-
er and keep it indoors in winter.
(6) If the outside temperature is be-
low 0
℃
, add antifreeze or drain
coolant completely to prevent the
engine from freezing and burst-
ing.
(7)
Remove the key and store it
separately.
► long-term Storage
Clean the Ride on lawnmower thor-
oughly and store it as follows:
(1) Change engine oil with new oil
and run the engine for 5 min-
utes to distribute oil to each part
evenly.
(2) Drain coolant from the radiator.
Then, make a label indicating
"No Coolant" and fix it onto the
steering wheel.
If antifreeze is already added, it
is not necessary to drain coolant.
(3) Add oil, fluid and fuel to each
part according to the mainte-
nance chart.
(4) Apply a thin lm of grease of oil
to body parts that are apt to rust.
(5) Check each bolt and nut for
looseness and tighten any loose
bolt and nut.
(6) Set the tire inflation pressure a
little higher than the specifica-
tion.
►
(7) Remove a weight. Detach or
lower an implement.
(8) Chock the rear wheels.
(9) Remove the battery from the
Ride on lawnmower or turn off
its switch to cut power connec-
tion.
(10) Place wood blocks under the
tires to protect them.
(11) Charge the battery every 2
months during long-term stor-
age.
(12) Store it in a dry place to avoid
rain or snow and cover the
body.
To Next Page
Loading...
Need help?
General
