eorresponding mode, the sereen displays this mode is selected.
6. The main sereen will show ehannel name ·orfrequeney (reeeiving frequeney) aeeording to
the seleeted mode.
Radio Info
Radio eontains the following information:
• My Number
• Versions
Note: At any time you ean return to the previous sereen by pressing the
[EI]
key.
My Number
1. Press [
e]
key to enter the menu mode.
2. Press [D or a] key to utilities, and then press [
e]
key to seleet.
3. Press [Dora] key to radio information, and press
[e]
key to seleet.
4. Press [Dora] keyto my number, then press
[e]
key.
5. The display shows radio IO and name.
Versions
Display radio firmware version.
1. Press [
e]
key to enter the menu mode.
2. Press [Dora] key to utilities, and then press
[e]
key to seleet.
3. Press [Dora] key to radio information, and press [
e]
key to selee!.
nI
4. Press [Dora] key to radio versions, and then press [
e]
key.
5. The sereen will display the eurrent firmware version, Codeplug version.
Program Radio
Radio eonfiguration mainly ineludes editing the ehannel eontents
Channel eontents ean be edited include:
• RX Frequeney
• TX Frequeney
• Channel Name
• Time out Timer
• CTC!DCS
• ColorCode
• Repeater Siot
Rx Frequency
1. Press
[e ]
key to enter the menu mode.
2. Press [Dora] key to utilities, and then press [
13]
key to seleet.
3. Press [Dora] key to program radio, and then press
[e]
key to seleet.
4. Use the keypad to enter the eorreet Program radio password (programmed by software),
and then press [
e]
key to selee!.
5. Press [D ora] key to reeeiving frequeney, and then press [
e]
key to selee!.
6. The sereen displays reeeiving frequeney of the eurrent ehannel, and then press [
e]
key
112
.1
To Next Page
Loading...
Need help?
General
