LEA-6 / NEO-6 / MAX-6 - Hardware Integration Manual
UBX-14054794 Production Information Product handling
Page 63 of 85
3.3.9 Recommended parts
(3.3.4 C) Standoff Voltage>3.3 V
• Low Capacitance < 0.5 pF
(3.3.4 C) Standoff Voltage>3.3 V
• Standoff Voltage > Voltage for
active antenna
(3.3.4 C) Standoff Voltage>5 V
(3.3.6) 15dBm Max Power Input
(3.3.6) Low insertion loss
(3.3.6) 1.35x1.05x0.45 mm
•Good wireless band suppression
(3.3.6) 4.2x4.0x2.0 mm
> 8kV ESD HBM
(3.3.6 D) LNA + FBAR Filter
(3.3.6 D) Filter + LNA + FBAR
Filter
(3.3.4 A) LNA + FBAR Filter
Impedance @ freq GPS > 500
Feed thru Capacitor
for Signal
Murata
Monolithic Type
Array Type
Load Capacitance appropriate to
Baud rate
CL < xxx pF
Feed thru
Capacitor
for VCC
Table 26: Recommended parts for ESD/EOS protection
3.3.9.1 Recommended GPS & GLONASS active antenna (A1)
25*25*4mm, 2.7 to 3.9 V 6 mA at 3.3V
Taoglas (www.taoglas.com)
36*36*6mm, 3 to 5V / 30mA at 5V
Taoglas (www.taoglas.com)
36*36*3mm, 1.8 to 5.5V / 10mA at 3V
Table 27: Recommend GPS & GLONASS active antenna (A1). If possible, using a 36*36 mm patch antenna is preferred.
To Next Page
Loading...
Need help?
General
