Ublox NEO-6 User Manual

LEA-6 / NEO-6 / MAX-6 - Hardware Integration Manual
UBX-14054794 Production Information Revision history
Page 84 of 85
Revision history
Revision
Date
Name
Status / Comments
-
March 24, 2010
tgri
Initial release
A
July 20, 2010
mdur
Preliminary; updated 1.6.3 DDC, 1.7.1 RESET_N, 1.7.4 Config Pins, 2.1.1 Layout, 3.2 Soldering
B
Dec. 22, 2010
jfur
new: Integration LEA-6R (1.2), FW7, Data ready indicator (1.7.6), Second time pulse for LEA-6T
(1.7.5), Figure 41 and Figure 46, External active antenna supervisor NEO-6 (2.6.6), D DR
calibration
updated: Rework (3.2.8), Recommended parts (3.3.9), RTCM (B), Migration of LEA-4R designs
to LEA-6R (B.4.2), Checklist (2.1), 2.2.1 LEA-6 passive antenna design, 2.3.1 Passive antenna
design (NEO-6)
C
Feb. 3, 2011
jfur
MAX-6x integration, External active antenna supervisor, ANTOFF, External active antenna
control (NEO-6), GPS antenna placement for LEA-6R
D
May 18, 2011
jfur
Repeated Reflow Soldering updated (3.2.5), Soldering u-blox 6 modules in a leaded process
removed, updated for FW 7.03/DR2.0, LEA-6T-1 integration
E
Aug. 8, 2011
jfur
LEA-6x / NEO-6x updated for FW 7.03. Section added: 1.7.8 LEA-6T-0 antenna supervision
signals. Section 1.6.1 UART maximum baud rate. Section 3.3 EOS / ESD / EMI updated.
F
Sep. 14, 2011
jfur
NEO-6V integration. Section 1.6.4 SPI FLASH For new designs. Sections added: 2.2.2 LEA-6H
GLONASS ready module integration. Section B.2.2 Software migration from 6.02 to 7.03.
Section 3.3.9 Recommended parts, SAW.
G
Jan. 25, 2011
jfur
New section 2.1.3 Dead Reckoning. Section 2.2.2.1 “u-blox 6 GLONASS module”updated.
NEO-6P and NEO-6T integration. Section 1.7.1 RESET_N updated. Section 2.1.3 Updated:
Automotive Dead Reckoning (ADR) solutions. New section 2.6.7 External active antenna
supervisor using ANTON (MAX-6). Section 1.3.2.3 Power Save mode updated.
H
Feb. 6, 2012
jfur
Section 2.1.3 Automotive Dead Reckoning updated
Added section 2.6.7 External active antenna supervisor using ANTON
Section 1.3.2.3 Power Save mode updated
I
April 10, 2012
jfur
Added LEA-6N
K
April 22, 2013
jfur
Stencil thickness 150um (Figure 30, 33, 34)
LEA-6R: FW 7.03 DR2.02
Added section 3.1.1 Population of Modules
L
July 11, 2013
jfur
1.7.6 TX ready signal updated
Last revision with document number GPS.G6-HW-09007
R13
Dec. 19, 2014
amil
Added LEA-6T-2
R14
Jun. 06, 2017
rmak
Added Section 3.4 Safety precautions and Reference [15]
R15
Sep 26, 2017
msul
Added information on RED DoC in European Union regulatory compliance (page 2), added
Intended use statement in section 3.3.7 Electromagnetic interference (EMI), updated legal
statement in cover page and added Documentation feedback e-mail address in contacts page.

Ublox NEO-6 Specifications

General

Brand	Ublox
Model	NEO-6
Category	Control Unit
Language	English