UNI-T UTD1000 Series User Manual


UTD1000 User Manual
Video Trigger
By selecting video trigger, you can carry out field or line trigger with NTSC or PAL standard video signals.
Trigger menus are as follows :
Function Menu Setup Explanatory Note
Trigger Video
Set video trigger as the trigger type.
Trigger source
A
B
Alternate
Set A as the signal source trigger signal.
Set B as the signal source trigger signal.
A and B trigger their individual signals respectively.
Standard trigger
PAL
NTSC
Suitable for PAL video signals.
Suitable for NTSC video signals.
Synchronization
All lines
Specified lines
Odd field
Even field
Set the TV line to synchronize with trigger.
Set synchronized trigger on the specified line and adjust with the jog dial.
Set the video odd field to synchronized trigger.
Set the video even field to synchronized trigger.
Table 2-4


UNI-T UTD1000 Series Specifications

General

Brand	UNI-T
Model	UTD1000 Series
Category	Test Equipment
Language	English