UTD1000 User Manual
14. Multimeter Measurement
Operation instructions : Open the multimeter function menu by pressing [METER]. Setup is as follows.
Explanatory Note
Select the DC voltage measurement mode.
Select the AC voltage measurement mode.
Select the resistance measurement mode.
Select the Continuity measurement mode.
Select the diode measurement mode.
Select the capacitance measurement mode.
Select the DC current measurement mode.
Select the AC current measurement mode.
The multimeter automatically selects an appropriate range for measurement.
The user manually selects an appropriate range for measurement.
Display the current measurement range.
Turn the trend plot function on/off. This function records the moving trends of
voltage, current, resistance within a specified period.
When trend plot is on, the zero line value enhances the trend plot resolution.
Setup
DC voltage
AC voltage
Resistance
Continuity
Diode
Capacitance
DC current
AC current
Auto
Manual
On/off
Function Menu
Type
Range mode
Range
Trend plot
Coord bias
Table 2-19 Multimeter measurement menu
To Next Page
Loading...
Need help?
General
