UNI-T UTD1000 Series User Manual


UTD1000 User Manual
Parameter Measurement Setup
The notes below help you familiarize with the powerful automatic measurement functions of your digital storage
Oscilloscope. Press [SCOPE] then [F2] to access the parameter measurement menu shown in the following table.
Table 2-8 Parameter measurement menu
Function Menu
Parameter
measurement
Customized
parameters
Number of parameters
Channel
Indicator
Setup
Customized parameter
All parameters
OFF
Parameter 1
Parameter 2
Parameter 3
Total 27
A
B
OFF
Parameter 1
Parameter 2
Parameter 3
Explanatory Note
The screen displays only user-defined parameters.
All 27 parameters are displayed.
Close the automatic measurement function.
Up to 3 parameters can be displayed simultaneously on screen.
Select with the jog dial.
Display measurement value of Channel A.
Display measurement value of Channel B.
Close the automatic measurement display.
This function offers visual indication of the parameter being tested.


UNI-T UTD1000 Series Specifications

General

Brand	UNI-T
Model	UTD1000 Series
Category	Test Equipment
Language	English