UTD1000 User Manual
Example 1: To request saving a Channel A waveform
both on the internal memory and the USB device.
1.Press [A] to select Channel A.
2.Press [SAVE] to access the storage menu, then press
[F1] to select the storage function.
3.Press [F1] to select “waveform A” as save type.
4.Press [F2] to select internal as the save medium.
5.Press [F3] to select position 2 with the jog dial.
6.Press [F4]. The waveform is successfully saved when
the “Saving.......” progress bar disappears.
To store the waveform on a USB device, repeat the
above steps but select USB as the save medium. The
save menu is as follows :
Figure 2-26 Waveform save menu
Screen copy
With this function, you can save the display interface on
the USB device.
Example 2 : To request saving the display interface on
the USB device.
1.Press [A] to turn on Channel A.
2.Insert the USB device into the USB jack.
3.Press and hold the [SAVE] button for 4 to 5 seconds
and then release. The “Saving.......” progress bar will
appear. The display interface is successfully saved on
the USB device when that progress bar disappears.
You can see the saved USB image on your computer.
It is saved in the root directory of the USB device under
the name UTD1000xx (xx means the serial number).
To Next Page
Loading...
Need help?
General
