Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Code 93 to
any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only Code 93 symbols
containing a selected length. Select the length using the numeric bar codes in the
appendix of Numeric Bar Codes. For example, to decode only Code 93 symbols
with 14 characters, scan Code 93 – One Discrete Length, and then scan 1
followed by 4. To correct an error or to change the selection, scan the Cancel bar
code.
Two Discrete Lengths - Select this option to decode only Code 93 symbols
containing either of two selected lengths. Select lengths using the numeric bar
codes in the appendix of Numeric Bar Codes. For example, to decode only Code
93 symbols containing either 2 or 14 characters, select Code 93 – Two Discrete
Lengths, and then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan the Cancel bar code.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
