Unitech MS842P User Manual

63
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
 Level 2 – Automatic risk detection. This level of security may result in erroneous
decoding of DataBar Limited bar codes when scanning some UPC symbols. If a
misdecode is detected, the decoder operates in Level 3 or Level 1.
 Level 3 – Security level reflects newly proposed GS1 standard that requires a
5X trailing clear margin.
 Level 4 – Security level extends beyond the standard required by GS1. This
level of security requires a 5X leading and trailing clear margin.
Note: It may result in erroneous decoding due to Databar Limited and UPC symbologies.
GS1 DataBar Expanded
Netherlands KIX Code
To enable or disable Netherlands KIX Code, scan the appropriate bar code below.

Unitech MS842P Specifications

General

Type	Handheld bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Tilt reading angle	-60 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 25 (IR 2 of 5), Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), JAN, MSI, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
USB version	2.0
Wireless range	10 m
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Certification	CE, FCC, BSMI, VCCI
Product color	Black, Grey, Yellow
Housing material	-
International Protection (IP) code	IP54
Battery life	10 h
Charging time	4 h
Input voltage	5 V
Battery capacity	1620 mAh
Power consumption	400 mA
Power source type	DC
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	74 mm
Width	89 mm
Height	176 mm
Weight	200 g
Base dimensions	73 x 95 x 200 mm