Unitech PA500 User Guide

Chapter 1 Introduction8
Top and Bottom View
No. Component Description
1 Barcode laser
scanner (optional)
Reads and captures information on a barcode
label.
2 SDIO/MMC slot Accepts an SD (Secure Digital), MMC (Multimedia
Card) or SDIO (Secure Digital Input Output) cards,
allowing you to add more memory.
Install add-on applications or use audio text files
stored in it for use with internal applications. You
can also use it to back up data from your device.
3 Universal
connector
Connects your device to a USB charging cable,
which in turn connects to the computer’s USB port
and through the AC adapter to an electrical outlet.
This allows you to recharge your device and
perform an ActiveSync operation.
You can also use it to connect a peripheral
hardware, such as an docking station, to your
device.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm