Unitech PA500 User Guide

17
Using the Laser Scanner
PA500 has an integrated laser scanner which reads all major barcode
labels with excellent performance.
NOTE: The reading software must be enabled in order to operate the
scanner. This can be a user-loaded application or a pre-loaded utility
such as Scanner Settings.
PA500 has a built-in Scanner Settings utility that allows you to test the
device’s barcode scan function.
To launch Scanner Settings:
1 Tap Start > Settings > System tab.
2 On the System tab, tap Scanner Settings.
3 On the Settings tab, tap Barcode IDs.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm