Unitech PA500 User Guide

Chapter 4 Managing Programs56
Accessory Programs
Scan2Key
The Scan2Key application can route input from a scanner port to keypad
buffer, so that all input from scanner will be treated as they are just input
from touch screen keyboard. With this router, scanned data can be directly
input into scanner port aware application, like MS Pocket Word.
To launch Scan2Key:
1 Tap Start > Programs.
2 Tap Scan2Key. Scan2Key will appear on lower right corner of the
Today screen.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm