Unitech PA500 User Guide

Chapter 2 Hardware and Command Interface24
Navigation Bar
The navigation bar is located at the top of the screen. It displays the active
program and current time, and allows you to switch to other programs and
close screens.
Command Bar
Use the command bar at the bottom of the screen to perform tasks in
programs. The command bar includes menu names, buttons, and the Input
Panel button.
• To create a new item in the current program, tap New.
• To view a notification or an image file received on your device, tap
View.
• To open the Windows CE keyboard.
• To see the name of a button, tap and hold the stylus on the button.
Drag the stylus off the button so that the command is not carried out.

Unitech PA500 Specifications

System Memory

SDRAM	64 MB
Flash ROM	64 MB

Display

display resolution	240x320 QVGA
display type	Color Transflective TFT
touch screen	yes

Laser Bar Code Scanner

scan rate	104 scans/sec ± 12 scans/sec
scan angle default	47°±3°
scan angle reduced	35°±3°

Power

main battery voltage	3.7 V
main battery capacity	2200 mAh
rechargeable time	3.5 hours

Operating Environment

operating temperature	32°F to 122°F (0°C to 50°C)
storage temperature	-4°F to 140°F (-20°C to 60°C)
relative humidity	5% ~ 95% (non-condensing)

Weight and Dimensions

weight with battery and scan engine	Under 213 g
length	126 mm
height	23 mm