EasyManuals Logo
Home>Unitech>PDA>PA500

Unitech PA500 User Guide

Unitech PA500
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
81
Regulatory Compliance Statements
FCC Statement
This is a FCC Part 15 Class B product. In a domestic environment this
product may cause radio interference, in which case the user may be
required to take adequate measures.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian
Interferance-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du
Reglement sur le material broilleur du Canada.
The device is certified to the requirements of RSS-139-1 for 2.4 GHz
spread spectrum devices.
European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC
89/336/ EEC directives.
Laser Information
The Unitech PA500 series is certified in the U.S. to conform to the
requirements of DHHS/CDRH 21CFR Subchapter J and to the
requirements of IEC 825-1. Class II and Class 2 products are considered to
be hazardous. The PA500 series contains internally a Visible Laser Diode
(VLD) whose emissions do not exceed the maximum limits as set forth in
the above regulations. The scanner is designed so that there is no human
access to harmful laser light during normal operation, user maintenance or
during prescribed serviceoperations.
The laser safety warning label required by the DHHS/IEC for the PA500
series’s optional laser scanner module is located on the memory
compartment cover, on the back of the unit.
CAUTION - Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous laser light. Use of
optical instruments with the scanner will increase eye hazard. Optical
instruments include binolulars, microscopes, and magnifying glasses. This
does not include eye glasses worn by the user.

Table of Contents

Other manuals for Unitech PA500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unitech PA500 and is the answer not in the manual?

Unitech PA500 Specifications

System Memory IconSystem Memory
SDRAM64 MB
Flash ROM64 MB
Display IconDisplay
display resolution240x320 QVGA
display typeColor Transflective TFT
touch screenyes
Laser Bar Code Scanner IconLaser Bar Code Scanner
scan rate104 scans/sec ± 12 scans/sec
scan angle default47°±3°
scan angle reduced35°±3°
Power IconPower
main battery voltage3.7 V
main battery capacity2200 mAh
rechargeable time3.5 hours
Operating Environment IconOperating Environment
operating temperature32°F to 122°F (0°C to 50°C)
storage temperature-4°F to 140°F (-20°C to 60°C)
relative humidity5% ~ 95% (non-condensing)
Weight and Dimensions IconWeight and Dimensions
weight with battery and scan engineUnder 213 g
length126 mm
height23 mm

Related product manuals