Universal Audio UAD User Manual

UAD Powered Plug-Ins Manual - 171 - Chapter 12: Ampex ATR-102
Parameter Dependencies
Available
Settings
Some ATR-102 parameter value ranges depend on the value of other param-
eters. These dependencies are listed in Table 13 below.
Ampex ATR-102
Latency
The Ampex ATR-102 uses an internal upsampling technique. This upsampling
results in a larger latency than most other UAD plug-ins. See “Compensating
Upsampled Plug-Ins” on page 108 for more information.
Table 13. Ampex ATR-102 parameter dependencies
Tape Speed Head Width Tape 1 Tape 2 Tape 3 Tape 4 Emphasis EQ
30 IPS 1” 250 456 468 ATR AES
30 IPS 1/2” 250 456 900 ATR AES
30 IPS 1/4” 250 456 900 ATR AES
15 IPS 1” 250 456 468 ATR NAB
15 IPS 1” 250 456 468 ATR CCIR
15 IPS 1/2” 250 456 900 ATR NAB
15 IPS 1/2” 250 456 900 ATR CCIR
15 IPS 1/4” 250 456 900 ATR NAB
15 IPS 1/4” 250 456 900 ATR CCIR
7.5 IPS 1/4” 250 456 35-90 111 NAB
7.5 IPS 1/4” 250 456 35-90 111 CCIR
3.75 IPS 1/4” 250 456 35-90 111 NAB
3.75 IPS 1/4” 250 456 35-90 111
CCIR

Universal Audio UAD Specifications

General

Brand	Universal Audio
Model	UAD
Category	Software
Language	English