DS1099-077 3
INTRODUCTION
Dear Customer,
Thank you for purchasing this product. We invite you to rear this manual carefully before starting any operation. The software
can be updated at any time. Consequently, the contents of this instruction manual are subject to change without prior notice.
Notes:
➢ IPC standard for Internet Protocol Camera.
➢ Select: left click.
➢ Double click: left click twice.
➢ Default IP address of the IP camera enabled in absence of DHCP: 192.168.100.100.
➢ Default username of the camera IP: admin (lower case); Password: admin (lower case).
➢ Default web port: 80. Default web port: 6066. Command port: 6060.
➢ To avoid IP address conflicts, it is advisable to connect and configure one IP camera on the network at a time.
➢ The content of this manual could be different from your current version. Please contact Urmet Technical Customer
Care if you encounter problems during operations. The manual will be regularly updated without prior notice.
1 PRODUCT DESCRIPTION
URMET devices Ref. 1099/212 is a wireless/LTE IP cameras which may be controlled entirely by connecting to the TCP/IP
network.
1.1 Technical specifications
➢ High-performance CMOS sensor.
➢ Optimised H.264/H.265 video compression algorithms; multi-stream transmission for high-definition images on
broadband and narrowband media.
➢ Simultaneous connection
➢ With integrated web server, Internet Explorer can be for real-time monitoring, setting and managing from the website.
➢ Mobile software based on the following platforms: iOS (iPhone), Android (Smartphone).
➢ Possibility to record on micro-SD card (not included) or on IP HVR/NVR device (not included).
➢ Remote system updates supported.
➢ LAN and Internet supported.
➢ ONVIF protocol supported.
➢ Various network protocols supported, such as HTTP, TCP/IP, IPv4, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS,
DDNS.
➢ LTE modem: band 1,2,3,5,7,8,20,34,38,39,40 e 41 with integrated antenna of 2dBi
➢ Alarm function supported on movement detection (the user can set area and sensitivity).
➢ Privacy area function supported.
➢ Wireless connection function.
➢ Snapshot function. Image uploading from email.
➢ Automatic reset function supported. Can be connected automatically in case of network interruption.
Note: the specifications of the various products may be subject to minor changes.
1.2 Opening the package
Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either missing
or damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it is damaged.
ACCESSORIES PROVIDED
➢ 1 WIFI IP camera
➢ 1 Mini-CD with URMET software.
➢ 1 URMET quick guide on paper
➢ 1 URMET App V-Stream Quick Guide on paper
➢ 1 addendum containing warnings
➢ 2 Antennas
➢ 1 first installation kit containing fixing screws and/or hex wrench and/or tools for opening the device
➢ 2 hex wrenches
IMPORTANT NOTE:
Accessories may vary without prior notice.
To Next Page
Loading...
Need help?
General
