8 DS1099-077
After having detected the IP camera, right-click and select “Open in IE” to open a Web page on IE. See the applicable section in the
complete manual if installation of an ActiveX component is required. You can select user name (default: admin), password (default:
admin), stream type (Main/Sub Stream) and language on the login page.
Select “Login” to open the LIVE page.
6 ACTIVEX CONTROL CONFIGURATION
You will need to install the plug-ins when inspecting the IP camera using Internet Explorer for the first time. Set the browse
protection level to install the plug-in. Select the menu [Tools/Internet Options/Security/Custom Level] and for "ActiveX controls
and plug-ins" select "Enable" or "Prompt", as shown in the following figure. For safety, reset the default protection setting in IE
after having viewed the IP camera image.
To Next Page
Loading...
Need help?
General
