3
3-25
Basic Operation
Confirm Destination Screen
If the screen for confirming the destination before transmission (page 8-88) is set to [On], Check through the all
destination and press [Next]. appears when the Start key is pressed.
Use the procedure below to operate the Confirm Destination screen.
1 Press the U or V key to check all destinations.
Press the OK key to edit or delete the selected
destination.
To add a destination, press [Cancel] (the Left Select key)
to return to the previous screen.
2 After the checking is finished, press [Next] (the Right
Select key). Set original and press Start key. is displayed
on the screen.
If there are destinations that are hidden and not yet
checked, the screen displays Check the destination list
through the end. and returns to the Destination List
screen. Check all destinations.
3 Place the original on the platen and press the Start key.
Transmission starts.
To Next Page
Loading...
Need help?
General
