5-24
Sending Functions
File Separation
Create several files by dividing scanned original data page by page, and send the files.
Use the procedure below to split scanned original data into separate files when sending scanned originals.
1 Press the Send key.
2 Place the originals in the document processor or on the
platen.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [File Separation].
5 Press the OK key. File Separation appears.
6 Press the U or V key to select [Each Page] and then
press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
7 Specify the destination, and press the Start key to start
sending. The scanned original is sent after being divided
into files of one page each.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
To Next Page
Loading...
Need help?
General
