2
Preparation before Use
2-45
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of A4 or smaller plain paper (80 g/m
2
).
The multi purpose tray accepts paper sizes from A4 to A6 and Hagaki and from Legal to Statement-R, and 16K. Be
sure to use the multi purpose tray when you print on any special paper.
IMPORTANT: When using media types other than plain paper (such as recycled or colored paper), always specify
the media type setting. (Refer to Specifying Paper Size and Media Type for the Multi Purpose Tray on page 2-51.) If
you are using a paper weight of 106 g/m
2
or more, set the media type to Thick.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m
2
), recycled paper or color paper: 100 sheets
• Hagaki: 1 sheet
• OHP film: 1 sheet
• Envelope: 5 sheets
NOTE: When you load custom size paper, enter the paper size by referring to Specifying Paper Size and Media
Type for the Multi Purpose Tray on page 2-51.
When you use special paper such as transparencies or thick paper, select the media type by referring to Specifying
Paper Size and Media Type for the Multi Purpose Tray on page 2-51.
1 Pull the MP tray towards you until it stops.
2 Pull out the extension.
3 Adjust the position of the paper width guides on the MP
tray. Standard paper sizes are marked on the MP tray.
For standard paper sizes, slide the paper width guides to
the position marked correspondingly.
To Next Page
Loading...
Need help?
General
