EasyManuals Logo
Home>Vanderbilt>Security Camera>CCMS2010-IR/IRW

Vanderbilt CCMS2010-IR/IRW User Manual

Vanderbilt CCMS2010-IR/IRW
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Camera settings
© Vanderbilt 2016
38
12.3.6 DDNS
The DDNS setting can be found under this path: System> DDNS.
Dynamic Domain Name System (DDNS) allows a host name to be constantly syn-
chronized with a dynamic IP address. In other words, it allows those using a dy-
namic IP address to be associated to a static domain name so others can connect
to it by name.
Enable DDNS
Check the item to enable DDNS.
Provider
Select one DDNS host from the provider list.
Host name
Enter the registered domain name in the field.
Username/E-mail
Enter the username or E-mail required by the DDNS provider for authentication.
Password/Key
Enter the password or key required by the DDNS provider for authentication.
Click on <Save> when finished.
12.3.7 Mail
The Mail setting can be found under this path: System> Mail.
The administrator can send an E-mail via Simple Mail Transfer Protocol (SMTP)
when event is triggered. SMTP is a protocol for sending E-mail messages between
servers. SMTP is a relatively simple, text-based protocol, where one or more recip-
ients of a message are specified and the message text is transferred.
Two sets of SMTP can be configured. Each set includes SMTP Server, Server Port,
Account Name, Password and E-mail Address settings. Check the box SMTP
SSL to send E-mails via encrypted transmission. For SMTP server, contact the
network service provider for more specific information.
Click on <Save> when finished.
12.3.8 FTP
The FTP setting can be found under this path: System> FTP.
The administrator can set camera to send an alarm message to a specific File
Transfer Protocol (FTP) site when event is triggered. Users can assign alarm mes-
sage to up to two FTP sites. Enter the FTP details, which include server, server
port, user name, password and remote folder, in the fields. Check the box passive
mode to be connected with the FTP server by passively receiving the FTP serv-
ers IP address through a dynamic port. Alternatively, uncheck the box to directly
connect the FTP server via active mode.
Click on <Save> when finished.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vanderbilt CCMS2010-IR/IRW and is the answer not in the manual?

Vanderbilt CCMS2010-IR/IRW Specifications

General IconGeneral
BrandVanderbilt
ModelCCMS2010-IR/IRW
CategorySecurity Camera
LanguageEnglish

Related product manuals