Vanderbilt CCMS2010-IR/IRW User Manual

Camera settings
© Vanderbilt 2016
52
12.3.15 Periodical Event
The Periodical Event setting can be found under this path: System> Periodical
Event.
With Periodical Event setting, users can set the camera to upload images periodi-
cally to a FTP site or an E-mail address. For example, if the time interval is set to
60 seconds, the camera will upload images to the assigned FTP site or E-mail ad-
dress every 60 seconds. The images to be uploaded are the images before and af-
ter the triggered moment. Users can define how many images to be uploaded in
the <Triggered Action> section of this setting page.
Periodical Event
The default setting for the Periodical Event function is <Off>. Enable the function
by selecting <On>.
Time Interval
The default value of the time interval is 60 seconds. The setting range of the time
interval is from 60 to 3600 seconds
Triggered Action
 Upload Image by FTP
Select this item and the administrator can assign a FTP site and configure various
parameters. Images will be uploaded to the appointed FTP site periodically.
The <Pre-trigger buffer> function can define how many images to be uploaded be-
fore the triggered moment. The <Post-trigger buffer> function can define how
many images to be uploaded after the triggered moment.
NOTE: Normally the setting range of the <Pre-trigger buffer> is 1 to 20. However,
the setting range will change accordingly if the frame rate of MJPEG on the <Video
Frame Rate> setting page is 6 or smaller.
NOTE: Make sure FTP configuration has been completed. Refer to the FTP sec-
tion of this chapter for further details.
 Upload Image by E-mail
Select this item and the administrator can assign an e-mail address and configure
various parameters. Images will be uploaded to the appointed e-mail address peri-
odically.
The <Pre-trigger buffer> function can define how many images to be upload-
ed before the triggered moment. The <Post-trigger buffer> function can de-
fine how many images to be uploaded after the triggered moment.
NOTE: Normally the setting range of the <Pre-trigger buffer> is 1 to 20. However,
the setting range will change accordingly if the frame rate of MJPEG on the <Video
Frame Rate> setting page is 6 or smaller.
NOTE: Make sure SMTP configuration has been completed. Refer to the Mail sec-
tion of this chapter for further details.
File Name
Enter a file name in the blank, ex. image.jpg. The uploaded image’s file name for-
mat can be set in this section. Please select the one that meets the requirements.
 Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day, H: Hour, N: Minute, S: Second
X: Sequence Number

Vanderbilt CCMS2010-IR/IRW Specifications

General

Brand	Vanderbilt
Model	CCMS2010-IR/IRW
Category	Security Camera
Language	English