Safety
3 Safety
3.1 General safety precautions
Read the general safety precautions before installing/configuring/operating the
device.
Follow all warnings and instructions marked on the device.
Keep this document for reference purposes.
This document must always accompany the product.
Liability claim
Use only spare parts and accessories that have been approved by the manu-
facturer.
3.2 Transport
Keep the packaging material for future transportation.
Do not expose the device to mechanical vibrations or shocks.
3.3 Installation
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
The environmental conditions recommended by the manufacturer must be
observed. See section 'technical data'.
Do not operate the device close to sources of powerful electromagnetic radia-
tion.
The device should only be used for indoor applications.
The mounting surface must be solid and non-combustible.
Danger of electrical shock/fire hazard/damage to the device due to
incorrect connection
Connect the device only to a power source that complies with SELV
requirements and with the Limited Power Source requirements to
EN 60950-1.
3.4 Maintenance
Do not attempt to service or modify this device yourself. Refer this work to
qualified service personnel.
Do not use liquid cleaners or sprays that contain alcohol, spirit or ammonia.
To Next Page
Loading...
Need help?
General
