Vega VEGABAR 38 User Manual

23
5 Connecting to power supply
VEGABAR 39 • Three-wire 1 x transistor or 4 … 20 mA
57536-EN-200831
5.4 Switch-on phase
Afterswitchingon,thedevicerstcarriesoutaself-check:
•
Internal check of the electronics
•
The output signal jumps to the set fault current
1)
•
Switching outputs are controlled
The current measured value is then output on the signal cable.
1)
With current output activated

Vega VEGABAR 38 Specifications

General

Brand	Vega
Model	VEGABAR 38
Category	Accessories
Language	English