Velleman Personal Scope HPS10 User Manual

_________________________________________________________________________________________________________________________________________________________
*The pictures may differ depending on the type of PersonalScope
8
POWER SUPPLY
The HPS40 (HPS10) PersonalScope can be powered by means of an adapter, ordinary batteries or
rechargeable ones. Rechargeable batteries are advised for intensive use. The higher the capacity of the
rechargeable batteries, the longer the autonomy of the unit.
Attention:
Use a non-regulated adapter of 9VDC that supplies a min. of 300mA. Observe the polarity and consult
your retailer if necessary. (Fig. 5.0)
When using a regulated adapter, the user should verify whether it can supply 12VDC.
Batteries (option):
The unit can be used with either ordinary alkaline batteries or rechargeable
type (5x). (Fig. 4.0)
Open the battery cover by loosening the screw.
Insert the batteries in the holders. Mind the polarity!
Remove all non-rechargeable batteries when connecting an AC/DC adapter!
Fig 5.0
probe
test
Fig 4.0

Velleman Personal Scope HPS10 Specifications

General

Brand	Velleman
Model	Personal Scope HPS10
Category	Measuring Instruments
Language	English