EasyManuals Logo

Vespa GTS Super 300 User Manual

Vespa GTS Super 300
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
03_09
03_10
03_11
5. unscrew the fixing screws «C» that can be reached once the helmet compartment
has been removed;
6. Unscrew the screws «D» and remove the air filter cover.
Remove the filtering element and clean it with water and shampoo; then dry it with a
clean cloth and short blasts of compressed air. Finally, immerse it in a mixture of 50%
oil of the recommended type and 50% petrol. Then gently squeeze the filter element
between your hands, allow it to drip and then refit it. Oil or water deposits in the filter
housing can be cleaned off by removing the two rubber caps «E».
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS, IT IS NECESSARY TO SERVICE
THE AIR FILTER MORE OFTEN TO AVOID DAMAGING THE ENGINE.
CAUTION
IN ORDER NOT TO DAMAGE THE VEHICLE PLASTIC COVERS CONTACT AN
AUTHORISED SERVICE CENTRE TO HAVE THE AIR FILTER CLEANED.
Recommended products
AGIP FILTER OIL
Oil for air filter sponge
Mineral oil with specific additives for increased adhesiveness
45
3 Maintenance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vespa GTS Super 300 and is the answer not in the manual?

Vespa GTS Super 300 Specifications

General IconGeneral
Displacement278 cc
Fuel SystemElectronic fuel injection
Fuel Capacity8.5 liters
Seat Height790 mm
Front Tire120/70 - 12"
Rear Tire130/70 - 12"
Length1, 950 mm
Width755 mm
Dry Weight148 kg
Engine Type4-stroke, single-cylinder
Max Power23.8 hp @ 8, 250 rpm
Max Torque26 Nm @ 5, 250 rpm
Cooling SystemLiquid-cooled
TransmissionCVT automatic
Front SuspensionSingle arm with coil spring and hydraulic shock absorber
Rear SuspensionDouble hydraulic shock absorber with adjustable preload
Front Brake220 mm disc brake
Rear Brake220 mm disc brake

Related product manuals