Vespa GTS Super 300 User Manual

03_31
Rear optical unit (03_31)
Remove screw «A» to remove the rear headlight assembly.
Access to taillight bulbs, stop light bulb and license plate bulb.
To reassemble, repeat the operation in the reverse order.
N.B.
IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS RELATED TO THE HUMIDITY AND/OR
TO LOW TEMPERATURES.
THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.
THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE PIAGGIO AFTER-SALES
SERVICE NETWORK.
03_32
Rear turn indicators (03_32)
To gain access to the turn indicator bulbs, remove the fastening screws «E».
The bulbs have a bayonet coupling, to remove them press gently and twist anticlock-
wise about 30°. To refit follow the same steps but in reverse order.
59
3 Maintenance

Vespa GTS Super 300 Specifications

General

Displacement	278 cc
Fuel System	Electronic fuel injection
Fuel Capacity	8.5 liters
Seat Height	790 mm
Front Tire	120/70 - 12"
Rear Tire	130/70 - 12"
Length	1, 950 mm
Width	755 mm
Dry Weight	148 kg
Engine Type	4-stroke, single-cylinder
Max Power	23.8 hp @ 8, 250 rpm
Max Torque	26 Nm @ 5, 250 rpm
Cooling System	Liquid-cooled
Transmission	CVT automatic
Front Suspension	Single arm with coil spring and hydraulic shock absorber
Rear Suspension	Double hydraulic shock absorber with adjustable preload
Front Brake	220 mm disc brake
Rear Brake	220 mm disc brake