Vespa GTS Super 300 User Manual

WARNING
IN ORDER TO AVOID HARMFUL FLUID LEAKS WHILE RIDING, IT IS IMPORTANT
TO MAKE SURE THAT THE LEVEL NEVER EXCEEDS THE MAXIMUM VALUE.
IN ORDER TO GUARANTEE THE PROPER FUNCTION OF THE ENGINE, IT IS
NECESSARY TO KEEP THE RADIATOR GRILLE CLEAN.
Recommended products
AGIP PERMANENT SPEZIAL
coolant
Monoethylene glycol-based antifreeze fluid, CUNA NC 956-16
03_14
Checking the brake oil level (03_14, 03_15)
The brake fluid reservoirs are located on the pumps under the handlebar cover (front
on the right-hand side, rear on the left-hand side). The procedures to check the brake
fluid level for the front and rear brakes are identical.
Proceed as follows:
1. rest the scooter on its centre stand and make sure the handlebar is centred;
2. check fluid level through the corresponding warning light «C».
A certain lowering of the level is caused by wear on the pads. Should the level appear
to be below the minimum mark, please contact an Authorised Service Centre or
Dealer in order to have a thorough inspection of the braking system carried out. Pro-
ceed as follows:
3. remove the tank cover «D» loosening the two screws «E» and refill reaching the
correct level with the prescribed brake fluid type only and without exceeding the max-
imum level.
47
3 Maintenance

Vespa GTS Super 300 Specifications

General

Displacement	278 cc
Fuel System	Electronic fuel injection
Fuel Capacity	8.5 liters
Seat Height	790 mm
Front Tire	120/70 - 12"
Rear Tire	130/70 - 12"
Length	1, 950 mm
Width	755 mm
Dry Weight	148 kg
Engine Type	4-stroke, single-cylinder
Max Power	23.8 hp @ 8, 250 rpm
Max Torque	26 Nm @ 5, 250 rpm
Cooling System	Liquid-cooled
Transmission	CVT automatic
Front Suspension	Single arm with coil spring and hydraulic shock absorber
Rear Suspension	Double hydraulic shock absorber with adjustable preload
Front Brake	220 mm disc brake
Rear Brake	220 mm disc brake