2
Gently remove the side panel of the machine
and place it on a surface that does not com-
promise the integrity of the side panel.
3.2 REMOVING OUTER PANELS
The side panels of the VA388 can be removed
independently by partially unscrewing the screws
for each panel, accessible without removing the
various parts.
SIDE PANELS
1 Simply loosen the 2 screws on the top for
two turns in order to remove the panel. Use
a Phillips screwdriver.
3 Disconnect the power supply of the cup
warmer and remove all panels.
Fig. 61
Edition 01 of 08/2017
3.3
SERVICE MANUAL
Fig. 63
Fig. 64
Fig. 62